Cảm biến áp suất IFM với màn hình PI1717

Mô tả

Product characteristics
Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range	-100…1600 mbar -1.46…23.2 psi -40…642.5 inH2O -10…160 kPa
Process connection	threaded connection G 1 external thread Aseptoflex Vario
Application
Special feature	Gold-plated contacts
Application	flush mountable for the food and beverage industry
Media	viscous media and liquids with suspended particles; liquids and gases
Medium temperature [°C]	-25…150
Min. bursting pressure	40000 mbar 580 psi 4000 kPa
Pressure rating	15000 mbar 215 psi 1500 kPa
Vacuum resistance [mbar]	-1000
Type of pressure	relative pressure; vacuum
No dead space	yes
Electrical data
Min. insulation resistance [MΩ]	100; (500 V DC)
Protection class	III
Reverse polarity protection	yes
Integrated watchdog	yes
2-wire
Operating voltage [V]	20…30 DC
Current consumption [mA]	3.5…21.5
Power-on delay time [s]	< 1
3-wire
Operating voltage [V]	18…30 DC
Current consumption [mA]	5…45; (430 bei max. Laststrom)
Power-on delay time [s]	< 0.5
Inputs / outputs
Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Outputs
Total number of outputs	2
Output signal	switching signal; analogue signal; IO-Link
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Number of analogue outputs	1
Analogue current output [mA]	4…20, invertible; (scalable)
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes
2-wire
Max. load [Ω]	300
3-wire
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	100
Switching frequency DC [Hz]	125
Max. load [Ω]	(Ub – 10 V) / 21,5 mA; 650 Ω (Ub = 24 V)
Measuring/setting range
Measuring range	-100…1600 mbar -1.46…23.2 psi -40…642.5 inH2O -10…160 kPa
Set point SP	-98…1600 mbar -1.42…23.21 psi -39.2…642.3 inH2O -9.8…160 kPa
Reset point rP	-100…1598 mbar -1.45…23.17 psi -40.1…641.4 inH2O -10…159.8 kPa
Analogue start point	-100…1272 mbar -1.45…18.45 psi -40.1…510.6 inH2O -10…127.2 kPa
Analogue end point	228…1600 mbar 3.31…23.21 psi 91.6…642.3 inH2O 22.8…160 kPa
Min. difference between SP and rP	3 mbar 0.04 psi 1 inH2O 0.3 kPa
In steps of	1 mbar 0.01 psi 0.1 inH2O 0.1 kPa
Factory setting	SP1 =400 mbar rP1 = 368 mbar SP2 = 1200 mbar rP2 = 1168 mbar ASP = 0.00 mbar AEP = 1600 mbar dAP = 2.00 s dAA =2.00 s
Temperature monitoring
Measuring range	-25…150 °C -13…302 °F
Accuracy / deviations
Switch point accuracy [% of the span]	< ± 0,2; (DIN EN IEC 62828-1; Turn down 1:1)
Repeatability [% of the span]	< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation [% of the span]	< ± 0,2; (DIN IEC EN 62828-1 incl. zero point and span error, non-linearity, hysteresis; Turn down 1:1)
Linearity deviation [% of the span]	< ± 0,15; (Turn down 1:1)
Hysteresis deviation [% of the span]	< ± 0,15; (Turn down 1:1)
Long-term stability [% of the span]	< ± 0,1; (Turn down 1:1; per year)
Total deviation over temperature range	Temperature range total deviation -25…15 °C Characteristics deviation ± 0,05 % der Spanne / 10 K 15…80 °C Characteristics deviation 80…150 °C Characteristics deviation ± 0,1 % der Spanne / 10 K
Notes on the accuracy / deviation	for further details see section Diagrams and graphs
Temperature monitoring
Accuracy [K]	± 2,5+ (0,08 x ( Umgebungstemperatur – Mediumtemperatur ))
Repeatability [K]	± 0,2
Resolution [K]	0.2
Response times
Damping process value dAP [s]	0…99.99
Damping for the analogue output dAA [s]	0…99.99
2-wire
Step response time analogue output [ms]	30
3-wire
Min. response time of switching output (dAP) [ms]	3
Step response time analogue output [ms]	7
Temperature monitoring
Dynamic response T05 / T09 [s]	< 35 / < 135; (DIN EN 60751 water ; > 0,9 m/s)
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Identification and Diagnosis (0x4000), Measurement Data Channel (0x800A)
SIO mode	yes
Required master port type	A
Min. process cycle time [ms]	5.6
IO-Link resolution pressure [mbar]	0.05
IO-Link resolution temperature [K]	0.2
IO-Link process data (cyclical)	function bit length pressure 32 temperature 32 device status 4 binary switching information 2
IO-Link functions (acyclical)	application specific tag; internal temperature; operating hours counter; switching cycles counter; Pressure peak counter
Supported DeviceIDs	Type of operation DeviceID Default 1149 d
Operating conditions
Ambient temperature [°C]	-25…80
Storage temperature [°C]	-40…100
Protection	IP 67; IP 68; IP 69K
Tests / approvals
EMC	DIN EN 61326-1
Shock resistance	DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance	DIN EN 60068-2-6 20 g (10…2000 Hz)
MTTF [years]	214
Note on approval	factory certificate available as download at www.factory-certificate.ifm
UL approval	UL Approval no. J048 File number UL E174189
Mechanical data
Weight [g]	357.3
Materials	stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA
Materials (wetted parts)	ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE
Min. pressure cycles	100 million
Tightening torque [Nm]	35
Process connection	threaded connection G 1 external thread Aseptoflex Vario
Displays / operating elements
Display	Display unit LED, green switching status LED, yellow function display alphanumeric display, 4-digit measured values alphanumeric display, 4-digit
Display unit	mbar; psi; kPa; inH2O
Remarks
Pack quantity	1 pcs.
Electrical connection
Connection	Connector: 1 x M12; coding: A; Contacts: gold-plated
Diagrams and graphs
ambient temperature influence on the accuracy	X temperature Y total deviation

• Contact us via Facebook:
  –  https://www.facebook.com/profile.php?id=100063804900416
• Check out some other technology products at:
  –  viet-automation.com
• Or contact us via Email :
  –  Nhut.tdv@gmail.com