- Xin lỗi bạn, hiện sản phẩm này không thể mua được.
DIN 11864/11853
Sản phẩm tương tự
Sản phẩm tương tự
Mô tả
DIN 11864 was first released 1998 and showed aseptic DIN connections with both long ends and short ends. From release 2006-01 of DIN 11864 it cover only connections with long ends. The versions with short end are moved to a new standard, DIN 11853.
The o-ring and it’s groove are exactly the same in both standards.
In total there are 6 standards covering this assortment:
DIN 11864-1, Threaded connections with long ends
DIN 11864-2, Flange connections with long ends
DIN 11864-3, Clamp connections with long ends
DIN 11853-1, Threaded connections with short ends
DIN 11853-2, Flange connections with short ends
DIN 11853-3, Clamp connections with short ends
Comments to below part numbers
Screws and nuts are not included in flange versions.
Clamp ring is not included in clamp versions, there is just a reference to recommended clamp ring.
O-ring is not included below, it is found in chapter “Seals”.
Please see “Seals, O-rings for DIN 11864/11853”
“Bundstutzen” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
“Gewindestutzen”
ID surface: <0.8µm
Material: EN 1.4404
Use the DIN 11851 nut
“Bundstutzen” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
Semi bright
“Gewindestutzen”
ID surface: <0.8µm
Material: EN 1.4404
Use the DIN 11851 nut
“Bundstutzen” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
“Gewindestutzen”
ID surface: <0.8µm
Material: EN 1.4404
Semi bright
(Also fit DIN 11851 connections)
Material: EN 1.4301
“Nutflansch” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
“Bundflansch”
ID surface: <0.8µm
Material: EN 1.4404
“Nutflansch” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
“Bundflansch”
ID surface: <0.8µm
Material: EN 1.4404
“Nutflansch” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
“Bundflansch”
ID surface: <0.8µm
Material: EN 1.4404
“Bundstutzen” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
“Gewindestutzen”
ID surface: <0.8µm
Material: EN 1.4404
Use the DIN 11851 nut
“Bundstutzen” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
“Gewindestutzen”
ID surface: <0.8µm
Material: EN 1.4404
Use the DIN 11851 nut
“Bundstutzen” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
“Gewindestutzen”
ID surface: <0.8µm
Material: EN 1.4404
“Nutflansch” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
“Bundflansch”
ID surface: <0.8µm
Material: EN 1.4404
Semi bright “Nutflansch” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
Semi bright “Bundflansch”
ID surface: <0.8µm
Material: EN 1.4404
“Bundstutzen” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
Rec. clamp not included
ID surface: <0.8µm
Material: EN 1.4404
“Bundstutzen” with groove for o-ring type “Form A”
ID surface: <0.8µm
Material: EN 1.4404
O-ring not included
ID surface: <0.8µm
Material: EN 1.4404