Biến tần Danfoss/ Bien tan Danfoss VLT® AQUA Drive FC200 : Chuyên dụng trong cấp nước và xử lý nước thải, điều khiển bơm điều áp chạy luân phiên/ tăng cường đến 8 bơm, cấp bảo vệ đến IP68, màn hình hiển thị 5 thông số đồ họa, công suất lên đến 1400Kw. Thiết kế nhỏ gọn nhầm hạ giá thành đến mức thấp nhất, nhưng tích hợp đầy đủ các dạng kết nối truyền thông và SCADA. Xuất xứ: Denmark – Hàng NK Châu Âu Chất lượng cao
Danfoss VLT® AQUA Drive is dedicated to water and wastewater applications. With a wide range of powerful standard and optional features, the VLT® AQUA Drive provides the lowest overall cost of ownership for water and wastewater applications.
Features and benefits
Power and voltage range
200-240 V ….. 0.25 kW – 45 kW
380-480 V ….. 0.37 kW – 1000kW
525-600 V ….. 0.75 kW – 90 kW
525-690 V ….. 45 kW – 1,4 MW
Three phase
3*200-240V… 0,25-45kW
3*380-480V… 0,37-1000kW
3*525-600V… 0,75-90kW
3*525-690V… 11-1200kW
Single phase
1*200-240V 1,1-22kW
1*380-480V 7,5-37kW
Enclosures
IP20/chassis, IP21/NEMA 1, IP55/NEMA 12 and IP66/NEMA 4X
Dedicated water features Auto tuning of the PI controllers
With auto tuning of the PI controllers, the drive monitors how the system reacts on corrections made by the drive – and learns from it, so that precise and stable operation is achie ved quickly.
Pipe Fill Mode
Enables controlled (closed loop) filling of pipes. Prevents water hammering, bursting water pipes or blowing off sprinkler heads.
End of Pump Curve detects breaks and leakage
The feature detects breaks and leakage. End of curve triggers an alarm, shuts off the pump, or performs another userdefined action.
Dry Pump Protection lowers maintenance costs
The VLT® AQUA Drive constantly evaluates the condition of the pump, based on internal frequency/power measurements.
Standard cascade controller
The in-built cascade controller controls up to three pumps with fixed lead pump.
Motor Alternation
This built-in logic controls alternation between two pumps in duty/stand-by applications. Motion of the stand-by pump prevents sticking of the pump. An internal timer assures equal usage of the pumps.
Flow compensation
The flow compensation feature reduces the pressure set point according to the flow – which saves energy.
Initial/Final Ramp
The initial ramp provides fast acceleration of pumps to minimum speed, from where the normal ramp takes over. This prevents damage on thrust and bearings. Sensorless Pressure or Flow Control
Safety
The VLT® AQUA Drive can optionally be delivered with the safe stop functionality suitable for category 3 installations according to EN 954-1. This feature prevents the drive from starting unintended.
Accessories
A wide selection of accessories is available for the VLT® AQUA Drive to suit your needs. For further details see the Operation Instructions.
Options
Options for bus communication, user programs, etc., are delivered ready for plug and play.
Display options
Local Control Panel LCP (graphical and numerical)Cable for LCP, 3 m [9,8 ft.] Remote-mounting kit for Local Control Panel (LCP)
Application options
External 24 V supply card
Serial Communication OptionsProfibus Option Card (MCA-101)DeviceNet Option Card (MCA-104)Ethernet IP (MCA-121)
Mô tả
Biến tần Danfoss/ Bien tan Danfoss VLT® AQUA Drive FC200 : Chuyên dụng trong cấp nước và xử lý nước thải, điều khiển bơm điều áp chạy luân phiên/ tăng cường đến 8 bơm, cấp bảo vệ đến IP68, màn hình hiển thị 5 thông số đồ họa, công suất lên đến 1400Kw. Thiết kế nhỏ gọn nhầm hạ giá thành đến mức thấp nhất, nhưng tích hợp đầy đủ các dạng kết nối truyền thông và SCADA. Xuất xứ: Denmark – Hàng NK Châu Âu Chất lượng cao
Các mã hàng thông dụng, có sẵn:
FC-202PK75T4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131B8886
FC-202P1K1T4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131B8894
FC-202P1K5T4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131B8649
FC-202P2K2T4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131B8903
FC-202P3K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131B8912
FC-202P4K0T4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131B8920
FC-202P5K5T4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131B8940
FC-202P7K5T4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131B8650
FC-202P11KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6637
FC-202P15KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6641
FC-202P18KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6645
FC-202P22KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6765
FC-202P30KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6770
FC-202P37KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6775
FC-202P45KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6650
FC-202P55KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6654
FC-202P75KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6658
FC-202P90KT4E20H2XGXXXXSXXXXAXBXCXXXXDX Code no: 131F6663
VLT® AQUA Drive FC 200
Danfoss VLT® AQUA Drive is dedicated to water and wastewater applications. With a wide range of powerful standard and optional features, the VLT® AQUA Drive provides the lowest overall cost of ownership for water and wastewater applications.
Features and benefits
Power and voltage range
200-240 V ….. 0.25 kW – 45 kW
380-480 V ….. 0.37 kW – 1000kW
525-600 V ….. 0.75 kW – 90 kW
525-690 V ….. 45 kW – 1,4 MW
Three phase
3*200-240V… 0,25-45kW
3*380-480V… 0,37-1000kW
3*525-600V… 0,75-90kW
3*525-690V… 11-1200kW
Single phase
1*200-240V 1,1-22kW
1*380-480V 7,5-37kW
Enclosures
IP20/chassis, IP21/NEMA 1, IP55/NEMA 12 and IP66/NEMA 4X
Dedicated water features Auto tuning of the PI controllers
With auto tuning of the PI controllers, the drive monitors how the system reacts on corrections made by the drive – and learns from it, so that precise and stable operation is achie ved quickly.
Pipe Fill Mode
Enables controlled (closed loop) filling of pipes. Prevents water hammering, bursting water pipes or blowing off sprinkler heads.
End of Pump Curve detects breaks and leakage
The feature detects breaks and leakage. End of curve triggers an alarm, shuts off the pump, or performs another userdefined action.
Dry Pump Protection lowers maintenance costs
The VLT® AQUA Drive constantly evaluates the condition of the pump, based on internal frequency/power measurements.
Standard cascade controller
The in-built cascade controller controls up to three pumps with fixed lead pump.
Motor Alternation
This built-in logic controls alternation between two pumps in duty/stand-by applications. Motion of the stand-by pump prevents sticking of the pump. An internal timer assures equal usage of the pumps.
Flow compensation
The flow compensation feature reduces the pressure set point according to the flow – which saves energy.
Initial/Final Ramp
The initial ramp provides fast acceleration of pumps to minimum speed, from where the normal ramp takes over. This prevents damage on thrust and bearings. Sensorless Pressure or Flow Control
Safety
The VLT® AQUA Drive can optionally be delivered with the safe stop functionality suitable for category 3 installations according to EN 954-1. This feature prevents the drive from starting unintended.
Accessories
A wide selection of accessories is available for the VLT® AQUA Drive to suit your needs. For further details see the Operation Instructions.
Options
Options for bus communication, user programs, etc., are delivered ready for plug and play.
Display options
Local Control Panel LCP (graphical and numerical)Cable for LCP, 3 m [9,8 ft.] Remote-mounting kit for Local Control Panel (LCP)
Application options
External 24 V supply card
Serial Communication OptionsProfibus Option Card (MCA-101)DeviceNet Option Card (MCA-104)Ethernet IP (MCA-121)
I/O options
General Purpose I/O (MCB 101),
Relay Option (MCB 105),
Extended cascade option (MCO-101),
Advanced cascade option (MCO-102),
Analogue input option (MCB109),
External 24VDC supply option (MCB-107)
Sensor input option(MCB114)
Filters
Harmonic Filter (AHF 005/010 MCE) Sine-Wave Filters (MCC 101) dU/dt filter (MCC 102)
Other accessories
IP21/NEMA1 Kit
USB connection cable to PC
Harmonic Filter cable to PC